6.3.3.2 Switch The Sealing Function On / Off - FP PostBase Vision Reference Manual

Latch lever

6.3.3.2 Switch the sealing function on / off

Fold the letter guide down
If the letter guide is in the way when feeding
large-sized mail pieces, you can fold the
letter guide down.
• Carefully pull out the letter guide up to the
stop.
• Fold the letter guide down as shown in the
illustration and place it onto the tabletop.
Adjusting the inclination of the ramp
• Unlock the ramp: Push the latch lever to
the left.
• Lift up or lower the ramp. Release the lever
to lock the ramp in the desired position.
If the letters (up to a max. thickness of 7 mm)
are to be sealed:
• Set the seal / non seal switch to the rear, to
the seal position.
The sealing function is switched on. The LEDs
below the sealant tank flap light up brightly.
If the letters are not to be sealed, or have
already been sealed:
• Set the seal / non seal switch to the front in
the non seal position.
The sealing function is switched off. The LEDs
below the sealant tank flap are dimmed.
73
Franking