On-Screen Keyboard - FP PostBase Vision Reference Manual

46
PostBase Vision
Button assigned according to
function (not available here)
4.3.7

On-screen keyboard

Text field (here: 5 lines for text
as an advertising imprint)
Toggle button
assignment
Current input
Information text
(if available)
Delete entry
Cursor
Delete
Line break
(only for certain functions)
Input via numeric keypad
Use the keypad in the left area to input val-
ues. The display field at the top right shows
your entry.
The keypad is always adjusted to the respec-
tive situation: If available, the bottom left but-
ton is assigned an operating action adjusted
to the current function, e.g. entering a deci-
mal point.
The information text provides information
about special features and additional notes.
Use OK to apply the current setting and exit
the setting menu.
Use C to discard your entry and exit the
ANCEL
setting menu.
PostBase Vision opens the on-screen key-
board to enter text, numbers and special
characters, e.g. for an individual text as
advertising imprint, for entering shortcut
names and searching cost accounts.
The entered text can be seen at the top of the
display. Use the arrows to the left and right of
the text field to move the cursor in the text.
You can place the cursor directly at the
desired text position by tapping it.
The on-screen keyboard allows you to enter
letters, numbers and a number of special
characters.