Standby (Sleep Mode) - FP PostBase Vision Reference Manual

4.2

Standby (Sleep mode)

Disconnecting the PostBase Vision from
mains
Caution! Make sure to always turn the
PostBase Vision off with the ON/OFF button
before disconnecting the PostBase Vision
power cables. Never pull the power plug or
separate the power supply in any other way
before the printing system has reached its
sealed position. This is the only way to prevent
drying up and to ensure a permanently high
print quality.
• Press the ON/OFF button for three seconds
3 seconds
When the illumination is off:
• Unplug the power plug from the power
If you do not use the franking system for a
while, it automatically switches to Sleep
mode (standby).
The display is dark and the ON/OFF button is
illuminated in standby.
Briefly touch the display to 'wake up'
PostBase Vision.
As an alternative, you can briefly press the
ON/OFF button.
to turn the PostBase Vision off.
outlet.
The basics of operation
39