Seal Only (Postbase Vision With Feeder) - FP PostBase Vision Reference Manual

94
PostBase Vision

Seal Only (PostBase Vision with feeder)

11.5
With the special function 'Seal Only', you can seal and count letters without printing
(up to7 mm). This special function is only available on PostBase Vision systems with
feeder. Please refer to the mail piece specifications on pages 187 to 188.
• Open the M
• Choose S
• Choose S
PostBase Vision opens the 'Automatic Feed-
Counter
ing' pop-up for the 'Seal Only' function.
All settings for automatic feeding, preparing
and positioning letter stacks are done exactly
as when franking mail. For detailed informa-
tion, please read chapter 6.3.3.
• On the feeder, switch on the seal function:
• Position letter stack on the feeder / start
The 'Seal Only' special function has its own
counter. PostBase Vision shows the number
of transported mail pieces on the upper right
side of the display.
When leaving the 'Seal Only' function, the
counter is reset to '0'.
.
ENU
F
PECIAL UNCTIONS
O
EAL NLY
Set the switch to the position seal (see also
chapter 6.3.3.2, page 73).
letter transport.
.
.