Croplands WEED-IT Quadro User Manual page 71

12. Calibration settings form
12.1 General Machine Information
Your dealer uses this page to write down the current settings of your WEED-IT system. You
may need these settings when replacing a sensor or after resetting the system to factory
defaults.
This form is intended to be filled in during setup and testing at the customer; this form must
be kept with the machine.
Machine type ______________________________________________________
Boom width ______________________________________________________
Serial ______________________________________________________
Dealer ______________________________________________________
Customer ______________________________________________________
12.2 Dealer menu configuration settings
12.2.1 Menu 200 Console and sensor information
Menu 200 Console and sensor information
Console serial _______________
Sensor serial numbers:
Left boom
A
B
C
D
E
F
G
H
I
Right boom
A
B
C
D
E
F
G
H
I
WEED-IT Quadro | User Manual - BT-UMWEEDQ-B | 71 / 82