Switching On/Off - Croplands WEED-IT Quadro User Manual

Warnings when using certain herbicides
Please note that the use of slow-effective herbicides (i.e. 20 hours or
longer) may cause damage to pump membranes, hoses, pipes and
tanks.
Do not use of any unauthorized mixture of two or more different
herbicides.
Do not use herbicides that have the tendency to stick or coagulate.
The WEED-IT is not suitable for herbicide powders that must be
dissolved in water.
When storing the WEED-IT for a longer period of time, flush the
machine with clear water. In addition, clean all hoses carefully to
prevent that the herbicide solution degrades the quality of the any
hoses when it is not in motion.

2.4 Switching ON/OFF

The On/Off switch is located at the top left of the Control unit:
To switch on the WEED-IT:
The WEED-IT system switches on automatically once it receives a sufficient voltage from the
battery. So be aware that once the master switch is put on, the WEED-IT will switch on.
1. Press and hold
activates. After a couple of moments, the Start-up screen opens:
for 1 second. You will hear a short beep and the display
WEED-IT Quadro | User Manual -BT-UMWEEDQ-B 13/ 82