Croplands WEED-IT Quadro User Manual page 52

4. An error is automatically removed from the Main screen when a problem is solved.
The error will still be visible in this screen (101) as a non-persistent error.
When, for example, the pressure is low because the pump was not running, the error
message will disappear from the Main screen when the pump is turned on and the
pressure is above the lower limit.
The dot in front of an error indicates that the error is persistent.
Press this key to return to the Main screen.
Press this key to clear any temporary errors and messages. In case of a
permanent error, the message for that error will re-appear immediately.
These keys are available if the list is too long for the screen. Use the keys
to access the rest of the list.
If more than one warning has been issued, they appear consecutively in the Main screen:
You will see each message for a few seconds before the next one is displayed. To see all
messages simultaneously, use menu 101.
When WEED-IT is turned off, all messages are deleted. Only the dealer can
then retrieve 'old' messages from a special dealer menu.
8.2 Warnings and errors overview
See also "Warnings menu (101)" on page 42.
Errors &
Warnings
ERROR A serial problem has occurred. This
message appears whenever a
serious internal malfunction has
occurred in the Control unit's
firmware.
No ORBUS The Power Converter does not
reply
52 / 82 | WEED-IT Quadro | User Manual - BT-UMWEEDQ-B
Details
Contact your supplier immediately
and report when and how the
error occurred. Also make a note
of the circumstances under which
the error occurred, as well as the
precise text in the error report
(Messages menu - 101)
Check the Control unit connection
cables (between the Power
converter and the Control unit) for
physical damage.
Contact your supplier and report
when and how the error occurred.
Also make a note of the
circumstances under which the
error occurred.
How to resolve