Croplands WEED-IT Quadro User Manual page 36

Once the spraying season is over, remove the control panel and store it in a dry warm
place:
1. Disconnect the console connection cable from the control unit.
2. Put the dust cap on the open control unit connector.
Always clean the filters of your sprayer before storage. Refer to your sprayer's
manual.
Storage in freezing circumstances requires adding anti-freeze fluid to the fluid system.
Make sure the anti-freeze fluid is appropriate for the circumstances and that it is well
distributed through your sprayer's fluid system. This includes the added WEED-IT
spray-related parts such as the solenoid valves and the ramsey valve.
General cleaning and transport instructions
Do not clean the system with a high pressure nozzle (control panel, power box,
sensors, etc.).
Regularly clean the sensor windows with a soft cloth. Note that sand will scratch the
windows.
36 / 82 | WEED-IT Quadro | User Manual - BT-UMWEEDQ-B