Crop Protection Solutions; Intended Use - Croplands WEED-IT Quadro User Manual

2.2.5 Crop Protection Solutions

Always follow the instructions of the manufacturer of the Crop
Protection Solution!
The use of certain herbicides may be subject to local law. Check for
such laws and follow them strictly.
Never open a pipe or hose that is under pressure!
Repair the machine only after it has been cleaned extensively and
always wear a protective mask.
Never fill the tank above the specified maximum level.
When handling herbicides or toxic agents, always wear protective
clothing, such as protective gloves, protective clothing and protective
glasses.
Check for a possible interaction between the herbicide and certain
sensitive parts of the machine.
Don't use any herbicides that have the tendency to stick or coagulate.
Crop protection machines may not be filled with surface water, in order
to protect humans, animals and the environment.
For storage instructions, and instructions for cleaning and transport, refer to "Cleaning,
Storage and Transport" on page 35.

2.3 Intended use

The WEED-IT system is intended to be used as an add-on to a crop spraying system. Use the
WEED-IT only as described in this manual.
Only use the system for spraying liquid herbicides.
Only use parts that comply with manufacturer specifications.
12 / 82 | WEED-IT Quadro | User Manual -BT-UMWEEDQ-B
Wear protective clothing!
Pay attention to any safety instructions and warnings!
Follow the guidelines about the application of the solution, the
amount to be used, and the cleaning instructions.