Croplands WEED-IT Quadro User Manual page 57

Sensor serial One of the sensors does not have
number a valid serial number
Configure Restored to factory default
If the error occurs after a sensor
replacement, your supplier will
need to replace this sensor. If this
problem occurs without changing
the sensors, there is a
communication problem between
one of the sensors and the Control
unit. Follow the same procedure as
you would in case of a COM error.
The sensor with the
communication issue is in this case
not the one with the x, but the
sensor that shows an unusual
serial number in the sensor
information menu (100).
Contact your supplier
immediately.
WEED-IT Quadro | User Manual - BT-UMWEEDQ-B | 57 / 82