YOKOGAWA WT1600FC User Manual page 87

[:INPut]:CURRent:TERMinal:ELEMent<x>
Function Sets the current measurement terminal of the
power measurement element or queries the
current setting.
Syntax [:INPut]:CURRent:TERMinal:
ELEMent<x> {DIRect|SENSor}
[:INPut]:CURRent:TERMinal:
ELEMent<x>?
<x> = 1 to 4 (power measurement element)
DIRect = Direct input
SENSor = Current sensor input
Example :INPUT:CURRENT:TERMINAL:
ELEMENT1 DIRECT
:INPUT:CURRENT:TERMINAL:ELEMENT1?
-> :INPUT:CURRENT:TERMINAL:
ELEMENT1 DIRECT
Description This command is invalid on models that are only
equipped with impedance measurement
elements, since the mode is fixed to impedance
measurement.
[:INPut]:FILTer?
Function Queries all settings related to the filter.
Syntax [:INPut]:FILTer?
Example :INPUT:FILTER? -> :INPUT:FILTER:
LINE:ELEMENT1 OFF;ELEMENT2 OFF;
ELEMENT3 OFF;ELEMENT4 OFF;
ELEMENT5 OFF;:INPUT:FILTER:
ZCROSS:ELEMENT1 OFF;ELEMENT2 OFF;
ELEMENT3 OFF;ELEMENT4 OFF
[:INPut]:FILTer:LINE?
Function Queries the line filter settings of all elements.
Syntax [:INPut]:FILTer:LINE?
Example :INPUT:FILTER:LINE? -> :INPUT:
FILTER:LINE:ELEMENT1 OFF;
ELEMENT2 OFF;ELEMENT3 OFF;
ELEMENT4 OFF;ELEMENT5 OFF
[:INPut]:FILTer[:LINE][:ALL]
Function Collectively sets the line filters of all elements.
Syntax [:INPut]:FILTer[:LINE][:ALL]
{OFF|<Frequency>}
OFF = Line filter OFF
<Frequency> = 500 Hz, 5.5 kHz (line filter ON,
cutoff frequency)
Example :INPUT:FILTER:LINE:ALL OFF
Description Line filters of all power measurement elements
are collectively set. To set the line filter on
impedance measurement elements, use the
"[:INPut]:FILTer[:LINE]:
ELEMent<x>" command. This command can
be used only on models that are equipped with
power measurement elements.
IM 760151-17E
[:INPut]:FILTer[:LINE]:ELEMent<x>
Function Sets the line filter of the element or queries the
current setting.
Syntax [:INPut]:FILTer[:LINE]:
ELEMent<x> {OFF|<Frequency>}
[:INPut]:FILTer[:LINE]:ELEMent<x>?
<x> = 1 to 5 (element)
OFF = Line filter OFF
<Frequency> = 500 Hz, 5.5 kHz (line filter ON,
cutoff frequency)
Example :INPUT:FILTER:LINE:ELEMENT1 OFF
:INPUT:FILTER:LINE:ELEMENT1? ->
:INPUT:FILTER:LINE:ELEMENT1 OFF
[:INPut]:FILTer:ZCRoss?
Function Queries the zero-crossing filter settings of all
power measurement elements.
Syntax [:INPut]:FILTer:ZCRoss?
Example :INPUT:FILTER:ZCROSS? ->
:INPUT:FILTER:ZCROSS:ELEMENT1 OFF;
ELEMENT2 OFF;ELEMENT3 OFF;
ELEMENT4 OFF
Description This command is invalid on models that are only
equipped with impedance measurement elements,
since the mode is fixed to impedance measurement.
[:INPut]:FILTer:ZCRoss[:ALL]
Function Collectively sets the zero-crossing filters of all
power measurement elements.
Syntax [:INPut]:FILTer:ZCRoss[:ALL]
{OFF|<Frequency>}
OFF = zero-crossing filter OFF
<Frequency> = 500 Hz (zero-crossing filter
ON, cutoff frequency)
Example :INPUT:FILTER:ZCROSS:ALL OFF
Description This command is invalid on models that are only
equipped with impedance measurement elements,
since the mode is fixed to impedance measurement.
[:INPut]:FILTer:ZCRoss:ELEMent<x>
Function Sets the zero-crossing filter of the power
measurement element or queries the current
setting.
Syntax [:INPut]:FILTer:ZCRoss:
ELEMent<x> {OFF|<Frequency>}
[:INPut]:FILTer:ZCRoss:ELEMent<x>?
<x> = 1 to 4 (power measurement element)
OFF = zero-crossing filter OFF
<Frequency> = 500 Hz (zero-crossing filter
ON, cutoff frequency)
Example :INPUT:FILTER:ZCROSS:ELEMENT1 OFF
:INPUT:FILTER:ZCROSS:ELEMENT1? ->
:INPUT:FILTER:ZCROSS:ELEMENT1 OFF
Description This command is invalid on models that are only
equipped with impedance measurement elements,
since the mode is fixed to impedance measurement.
5.10 INPut Group
5
5-51