Table of Contents
Advertisement
5.13 NUMeric Group
:NUMeric[:NORMal]:CLEar
Function
Clears the numeric data output item (sets
"NONE") for power measurement.
Syntax
:NUMeric[:NORMal]:CLEar {ALL|<NRf>
[,<NRf>]}
ALL = Clear all items
1st <NRf> = 1 to 255 (Item number to start
clearing)
2nd <NRf> = 1 to 255 (Item number to end
clearing)
Example
:NUMERIC:NORMAL:CLEAR ALL
Description If the 2nd <NRf> is omitted, the output items
from the start clear number to the last item (255)
are cleared.
:NUMeric[:NORMal]:ITEM<x>
Function
Sets the numeric data output items for power
measurement or queries the current setting.
Syntax
:NUMeric[:NORMal]:ITEM<x> {NONE|
<Function>,<Element>}
:NUMeric[:NORMal]:ITEM<x>?
<x> = 1 to 255 (item number)
NONE = No output item
<Function> = {URMS|UMN|UDC|UAC|IRMS|
...}(See the function selection list (1) of
"DISPlay group.")
<Element> =
{<NRf>|SIGMA|SIGMB|SIGMC}(<NRf> = 1 to
4) (power measurement element)
Example
:NUMERIC:NORMAL:ITEM1 URMS,1
:NUMERIC:NORMAL:ITEM1? -> :NUMERIC:
NORMAL:ITEM1 URMS,1
:NUMeric[:NORMal]:NUMber
Function
Sets the number of the numeric data that is
transmitted by ":NUMeric:NORMal:VALue?"
or queries the current setting.
Syntax
:NUMeric[:NORMal]:NUMber {<NRf>|
ALL}
:NUMeric[:NORMal]:NUMber?
<NRf> = 1 to 255 (ALL)
Example
:NUMERIC:NORMAL:NUMBER 15
:NUMERIC:NORMAL:NUMBER ->
:NUMERIC:NORMAL:NUMBER 15
Description • If the parameter is omitted for the
":NUMeric:NORMal:VALue?" command,
the numeric data from 1 to (the specified
value) is output in order.
• By default, the number of numeric data is set
to "15."
5-68
:NUMeric[:NORMal]:PRESet
Function
Presets the output item pattern of numeric data
for power measurement.
Syntax
:NUMeric[:NORMal]:PRESet {<NRf>}
<NRf> = 1 to 4 (preset pattern number)
Example
:NUMERIC:NORMAL:PRESET 1
Description • For details on the output items that are
preset, see "(1) Preset Pattern of Output
Items of Power Measurement Numeric Data."
• By default, output items of "Pattern 2" is
selected.
:NUMeric[:NORMal]:VALue?
Function
Queries the numeric data for power
measurement.
Syntax
:NUMeric[:NORMal]:VALue? {<NRf>}
<NRf> = 1 to 255 (item number)
• Example when <NRf> is specified
Example
:NUMERIC:NORMAL:VALUE? 1 ->
104.75E+00
• Example when <NRf> is omitted
:NUMERIC:NORMAL:VALUE? ->
104.75E+00,105.02E+00,-0.38E+00,
..(omitted)..,49.868E+00
• Example in which ":NUMeric:FORMat" is set
to "Float"
:NUMERIC:NORMAL:VALUE? ->
#4(Number of bytes, 4 digits)(Series of data
bytes)
Description • If <NRf> is specified, only the numeric data of
the item number is output.
• If <NRf> is omitted, the numeric data of item
numbers from 1 to ":NUMeric:
[:NORMal]:NUMber" is output in order.
• For the format of the individual numeric data
that is output, see "Numeric Data Format" at
the end of this group (section).
IM 760151-17E
Advertisement
Table of Contents
