YOKOGAWA WT1600FC User Manual page 68

5.5 FILE Group
:FILE:SAVE:NUMeric:TYPE
Function Sets the format of the numeric data to be saved
or queries the current setting.
Syntax :FILE:SAVE:NUMeric:TYPE {ASCii|
FLOat}
:FILE:SAVE:NUMeric:TYPE?
Example :FILE:SAVE:NUMERIC:TYPE ASCII
:FILE:SAVE:NUMERIC:TYPE? ->
:FILE:SAVE:NUMERIC:TYPE ASCII
Description This command is invalid on models that are only
equipped with impedance measurement
elements, since the mode is fixed to impedance
measurement.
:FILE:SAVE:SETup[:EXECute]
Function Saves of the setup parameter file.
Syntax :FILE:SAVE:SETup
[:EXECute] {<Filename>}
Example :FILE:SAVE:SETUP:EXECUTE "SETUP1"
Description • Specify the file name without the extension.
• This command is an overlap command.
:FILE:SAVE:WAVE?
Function Queries all settings related to the saving of
waveform display data files.
Syntax :FILE:SAVE:WAVE?
Example :FILE:SAVE:WAVE? -> :FILE:SAVE:
WAVE:TYPE BINARY
Description This command is invalid on models that are only
equipped with impedance measurement
elements, since the mode is fixed to impedance
measurement.
:FILE:SAVE:WAVE[:EXECute]
Function Executes the saving of the waveform display
data file.
Syntax :FILE:SAVE:WAVE
[:EXECute] {<Filename>}
Example :FILE:SAVE:WAVE:EXECUTE "WAVE1"
Description • Specify the file name without the extension.
• This command is an overlap command.
• This command is invalid on models that are
only equipped with impedance measurement
elements, since the mode is fixed to
impedance measurement.
5-32
:FILE:SAVE:WAVE:TRACe
Function Sets the waveform to be saved to a file or
queries the current setting.
Syntax :FILE:SAVE:WAVE:TRACe {U<x>|I<x>}
:FILE:SAVE:WAVE:TRACe?
<x> = 1 to 4 (power measurement element)
Example :FILE:SAVE:WAVE:TRACE U1
:FILE:SAVE:WAVE:TRACE? ->
:FILE:SAVE:WAVE:TRACE U1
Description • This command is valid when the format of the
waveform display data to be saved (:FILE:
SAVE:WAVE:TYPE) is "FLOat." When it is
{BINary|ASCii}, all waveforms of which the
display is turned ON are saved.
• This command is invalid on models that are
only equipped with impedance measurement
elements, since the mode is fixed to
impedance measurement.
:FILE:SAVE:WAVE:TYPE
Function Sets the format of the waveform display data to
be saved or queries the current setting.
Syntax :FILE:SAVE:WAVE:TYPE {BINary|ASCii|
FLOat}
:FILE:SAVE:WAVE:TYPE?
Example :FILE:SAVE:WAVE:TYPE BINARY
:FILE:SAVE:WAVE:TYPE? ->
:FILE:SAVE:WAVE:TYPE BINARY
Description This command is invalid on models that are only
equipped with impedance measurement
elements, since the mode is fixed to impedance
measurement.
IM 760151-17E