Table of Contents
Advertisement
CURRent
:
:IMPedance?
Function
Queries all settings related to impedance
measurements.
Syntax
:IMPedance?
Example
:IMPEDANCE? -> :IMPEDANCE:STATE:1;
MEASURE:TYPE STABLE;:IMPEDANCE:
SUPERPOSE:OUTPUT:STATE 0;TYPE DC;:
IMPEDANCE:SUPERPOSE:FREQUENCY:
RANGE HZ;VALUE 1.0002;:IMPEDANCE:
SUPERPOSE:OFFSET 0.000;
AMPLITUDE 0.000;DETAILE:
RATIO 1.000;LIMIT 1000.000,
-1000.000;HOLD NORMAL;
WAVEFORM SINE;:IMPEDANCE:DCCONTROL:
OUTPUT 0;OFFSET 0.000;DETAILE:
RATIO 1.000;LIMIT 1000.000,
-1000.000;HOLD NORMAL;:IMPEDANCE:
VOLTAGE:TERMINAL:ELEMENT5 HIGH;:
IMPEDANCE:VOLTAGE:ESTIMATE:
ELEMENT5 0.0010;:IMPEDANCE:VOLTAGE:
RANGE:ELEMENT5 AUTO
:IMPedance:CURRent:MRANge? (Measured
RANge)
Function
Queries the current range with respect to the
current measured value.
Syntax
:IMPedance:CURRent:MRANge? {<NRf>}
<NRf> = 1 to 5 (impedance measurement
element)
Example
(Example when impedance measurement
elements (Z5) are available in 2 and 3)
:IMPEDANCE:CURRENT:MRANGE? 2
-> 5.000E+00
:IMPEDANCE:CURRENT:MRANGE?
-> 5.000E+00,5.000E+00
IM 760151-17E
;
RANGe
:
ALL
ELEMent
<Space>
MRANg e
?
INITializ e
?
;
MRANg e
?
<Space>
?
<Space>
AUTO
FIX
<x>
<Space>
AUTO
FIX
?
?
<NRf>
<NRf>
Description • Returns the measurement range displayed on
the right side of the screen.
• If the parameter is omitted, the measurement
ranges of all built-in impedance measurement
elements are output in order from the
smallest element number.
:IMPedance:DCControl?
Function
Queries all settings related to the DC load
current.
Syntax
:IMPedance:DCControl?
Example
:IMPEDANCE:DCCONTROL? ->
:IMPEDANCE:DCCONTROL:OUTPUT 0;
OFFSET 0.000;DETAILE:RATIO 1.000;
LIMIT 1000.000,-1000.000;
HOLD NORMAL
:IMPedance:DCControl:DETaile?
Function
Queries all settings related to the detailed
settings of the DC load current.
Syntax
:IMPedance:DCControl:DETaile?
Example
:IMPEDANCE:DCCONTROL:DETAILE? ->
:IMPEDANCE:DCCONTROL:DETAILE:
RATIO 1.000;LIMIT 1000.000,
-1000.000;HOLD NORMAL
5.9 IMPedance Group
5-41
5
Advertisement
Table of Contents
