YOKOGAWA WT1600FC User Manual page 52

5.3 CURSor Group
:CURSor?
Function Queries all settings related to cursor
measurements.
Syntax :CURSor?
Example :CURSOR? -> :CURSOR:WAVE:STATE 0;
TRACE1 U1;TRACE2 I1;PATH MAX;
POSITION1 2.0E-03;
POSITION2 8.0E-03;:CURSOR:TREND:
STATE 0;TRACE1 1;TRACE2 2;
POSITION1 6;POSITION2 54
:CURSor:TRENd?
Function Queries all settings related to the cursor
measurement on the trend.
Syntax :CURSor:TRENd?
Example :CURSOR:TREND? ->
:CURSOR:TREND:STATE 1;TRACE1 1;
TRACE2 2;POSITION1 6;POSITION2 54
:CURSor:TRENd:POSition<x>
Function Sets the cursor position on the trend or queries
the current setting.
Syntax :CURSor:TRENd:POSition<x> {<NRf>}
:CURSor:TRENd:POSition<x>?
<x> = 1, 2
<NRf> = 0 to 500
Example :CURSOR:TREND:POSITION1 10
:CURSOR:TREND:POSITION1? ->
:CURSOR:TREND:POSITION1 10
:CURSor:TRENd[:STATe]
Function Turns ON/OFF the cursor display on the trend
or queries the current setting.
Syntax :CURSor:TRENd[:STATe] {<Boolean>}
:CURSor:TRENd:STATe?
Example :CURSOR:TREND:STATE ON
:CURSOR:TREND:STATE? -> :CURSOR:
TREND:STATE 1
:CURSor:TRENd:TRACe<x>
Function Sets the cursor target on the trend or queries
the current setting.
Syntax :CURSor:TRENd:TRACe<x> {<NRf>}
:CURSor:TRENd:TRACe<x>?
<x> = 1, 2
<NRf> = 1 to 16
Example :CURSOR:TREND:TRACE1 1
:CURSOR:TREND:TRACE1? -> :CURSOR:
TREND:TRACE1 1
5-16
:CURSor:TRENd:{X<x>|Y<x>|DY}?
Function Queries the cursor measurement value on the
trend.
Syntax :CURSor:TRENd:{X<x>|Y<x>|DY}?
X<x> = Trend time string of the cursor position
(X1=D+, X2=Dx)
Y<x> = Y-axis value of the cursor position
(Y1=Y+, Y2=Yx)
DY = Y-axis value between cursors (∆Y)
<x> = 1, 2
Example :CURSOR:TREND:X1? -> "2003/04/01
12:34:56"
:CURSOR:TREND:Y1? -> 78.628E+00
Description If the cursor display is not turned ON on the
trend, the following results.
For X<x>: "****/**/** **:**:**" is returned.
For Y<x> and DY: "NAN (Not A Number)" is
returned.
:CURSor:WAVE?
Function Queries all settings related to the cursor
measurement on the waveform display.
Syntax :CURSor:WAVE?
Example :CURSOR:WAVE? -> :CURSOR:WAVE:
STATE 1;TRACE1 U1;TRACE2 I1;
PATH MAX;POSITION1 2.0E-03;
POSITION2 8.0E-03
:CURSor:WAVE:PATH
Function Sets the cursor path on the waveform display or
queries the current setting.
Syntax :CURSor:WAVE:PATH {MAX|MIN|MID}
:CURSor:WAVE:PATH?
Example :CURSOR:WAVE:PATH MAX
:CURSOR:WAVE:PATH? -> :CURSOR:WAVE:
PATH MAX
:CURSor:WAVE:POSition<x>
Function Sets the cursor position on the waveform
display or queries the current setting.
Syntax :CURSor:WAVE:POSition<x> {<Time>}
:CURSor:WAVE:POSition<x>?
<x> = 1, 2
<Time> = 0 to 5.00 s
Example :CURSOR:WAVE:POSITION1 2MS
:CURSOR:WAVE:POSITION1? -> :CURSOR:
WAVE:POSITION1 2.0E-03
Description The selectable range and resolution of <Time>
is determined by the Time/div value of the
waveform (:WSETup:TDIV).
IM 760151-17E