Table of Contents
Advertisement
5.4 DISPlay Group
:DISPlay[:NUMeric]:IMPedance:TYPE
Function
Sets the numeric display format for impedance
measurement or queries the current setting.
Syntax
:DISPlay[:NUMeric]:IMPedance:
TYPE {ZR_ZI|U_I|Z_PHI}
:DISPlay[:NUMeric]:IMPedance:TYPE?
Example
:DISPLAY:NUMERIC:IMPEDANCE:
TYPE ZR_ZI
:DISPLAY:NUMERIC:IMPEDANCE:TYPE? ->
:DISPLAY:NUMERIC:IMPEDANCE:
TYPE ZR_ZI
:DISPlay[:NUMeric]:NORMal?
Function
Queries all settings related to the numeric
display for power measurement.
Syntax
:DISPlay[:NUMeric]:NORMal?
Example
• Example in which the display format of
numeric values (:DISPlay[:NUMeric]
:NORMal:IAMount) is set to "<NRf>(split
display)"
:DISPLAY:NUMERIC:NORMAL? ->
:DISPLAY:NUMERIC:NORMAL:
IAMOUNT 4;ITEM1 URMS,1;
ITEM2 UMN,1;ITEM3
UDC,1;...(omitted)
...;ITEM100 NONE;ICURSOR 1
• Example in which the display format of
numeric values (:DISPlay[:NUMeric]
:NORMal:IAMount) is set to "ALL (all
display)"
:DISPLAY:NUMERIC:NORMAL? ->
:DISPLAY:NUMERIC:NORMAL:
IAMOUNT ALL;FCURSOR URMS
Description This command is invalid on models that are only
equipped with impedance measurement
elements, since the mode is fixed to impedance
measurement.
:DISPlay[:NUMeric]:NORMal:FCURsor
Function
Sets the cursor position on the numeric display
(all display) for power measurement or queries
the current setting.
Syntax
:DISPlay[:NUMeric]:NORMal:
FCURsor {<Function>}
:DISPlay[:NUMeric]:NORMal:FCURsor?
<Function> = {URMS|UMN|UDC|UAC|IRMS|
...} (See the function selection
list (1).")
Example
:DISPLAY:NUMERIC:NORMAL:
FCURSOR URMS
:DISPLAY:NUMERIC:NORMAL:FCURSOR? ->
:DISPLAY:NUMERIC:NORMAL:
FCURSOR URMS
5-22
Description • Specify the cursor position in terms of the
function.
• This command is valid when the display
format of numeric values
(:DISPlay[:NUMeric]
:NORMal:IAMount) is set to "ALL (all
display)."
• This command is invalid on models that are
only equipped with impedance measurement
elements, since the mode is fixed to
impedance measurement.
:DISPlay[:NUMeric]:NORMal:IAMount
Function
Sets the numeric display format for power
measurement or queries the current setting.
Syntax
:DISPlay[:NUMeric]:NORMal:
IAMount {<NRf>|ALL}
:DISPlay[:NUMeric]:NORMal:IAMount?
<NRf> = 4, 8, 16, 42, or 78
Example
:DISPLAY:NUMERIC:NORMAL:IAMOUNT 4
:DISPLAY:NUMERIC:NORMAL:IAMOUNT? ->
:DISPLAY:NUMERIC:NORMAL:IAMOUNT 4
Description • The contents of the measured data that are
displayed are as follows depending on the
setting of the numeric display format.
<NRf>: Numeric display items are displayed
in order by the item number.(<NRf>
expresses the number of items that is
displayed on a single screen.)
ALL: All power measurement functions are
displayed in order by element.
• This command is invalid on models that are
only equipped with impedance measurement
elements, since the mode is fixed to
impedance measurement.
:DISPlay[:NUMeric]:NORMal:ICURsor
Function
Sets the cursor position on the numeric display
(split display) for power measurement or queries
the current setting.
Syntax
:DISPlay[:NUMeric]:NORMal:
ICURsor {<NRf>}
:DISPlay[:NUMeric]:NORMal:ICURsor?
<NRf> = 1 to 100
Example
:DISPLAY:NUMERIC:NORMAL:ICURSOR 1
:DISPLAY:NUMERIC:NORMAL:ICURSOR? ->
:DISPLAY:NUMERIC:NORMAL:ICURSOR 1
Description • Specify the cursor position in terms of the
item number.
• This command is valid when the display
format of numeric values
(:DISPlay[:NUMeric]
:NORMal:IAMount) is set to "<NRf> (split
display)."
IM 760151-17E
Advertisement
Table of Contents
