Table of Contents
Advertisement
:HCOPy:DIRection
Function
Sets the output destination of the screen image
data or queries the current setting.
Syntax
:HCOPy:DIRection {PRINter|FILE|
NETPrint}
:HCOPy:DIRection?
Example
:HCOPY:DIRECTION PRINTER
:HCOPY:DIRECTION? -> :HCOPY:
DIRECTION PRINTER
Description • {PRINTer} is valid only when the built-in
printer (/B5 option) is installed.
• {NETPrint} is valid only when the Ethernet
interface (/C10 option) is installed.
:HCOPy:EXECute
Function
Executes the screen image data output.
Syntax
:HCOPy:EXECute
Example
:HCOPY:EXECUTE
Description This command is an overlap command.
:HCOPy:FORMat
Function
Sets the file format of the screen image data to
be saved or queries the current setting.
Syntax
:HCOPy:FORMat {TIFF|BMP|PSCRipt}
:HCOPy:FORMat?
Example
:HCOPY:FORMAT TIFF
:HCOPY:FORMAT? -> :HCOPY:
FORMAT TIFF
Description This command is meaningless if the data output
destination (:HCOPy:DIRection) is set to
"PRINter."
:HCOPy:PRINter?
Function
Queries all settings related to the built-in printer
output.
Syntax
:HCOPy:PRINter?
Example
:HCOPY:PRINTER? -> (Same as the response
to ":HCOPy:PRINter:
DLISt?")
IM 760151-17E
:HCOPy:PRINter:DLISt?
Function
Queries all settings related to the printing of the
numeric data list using the built-in printer.
Syntax
:HCOPy:PRINter:DLISt?
Example
:HCOPY:PRINTER:DLIST? ->
:HCOPY:PRINTER:DLIST:INFORMATION 1;
NORMAL:ELEMENT1 1;ELEMENT2 0;
ELEMENT3 0;ELEMENT4 0;SIGMA 0;
SIGMB 0;SIGMC 0;URMS 1;UMN 1;UDC 1;
UAC 1;IRMS 1;IMN 1;IDC 1;IAC 1;P 1;
S 1;Q 1;LAMBDA 1;PHI 1;FU 1;FI 1;
UPPEAK 1;UMPEAK 1;IPPEAK 1;
IMPEAK 1;CFU 1;CFI 1;FFU 1;FFI 1;
Z 1;RS 1;XS 1;RP 1;XP 1;PC 1;
TIME 0;WH 0;WHP 0;WHM 0;AH 0;AHP 0;
AHM 0;ETA 0;SETA 0;F1 0;F2 0;F3 0;
F4 0;DURMS 0;DUMN 0;DUDC 0;DUAC 0;
DIRMS 0;DIMN 0;DIDC 0;DIAC 0
:HCOPy:PRINter:DLISt[:EXECute]
Function
Prints of the numeric data list using the built-in
printer.
Syntax
:HCOPy:PRINter:DLISt[:EXECute]
Example
:HCOPY:PRINTER:DLIST:EXECUTE
Description This command is an overlap command.
:HCOPy:PRINter:DLISt:INFOrmation
Function
Sets whether or not to add setup parameters
when printing the numeric data list using the
built-in printer or queries the current setting.
Syntax
:HCOPy:PRINter:DLISt:
INFOrmation {<Boolean>}
:HCOPy:PRINter:DLISt:INFOrmation?
Example
:HCOPY:PRINTER:DLIST:INFORMATION ON
:HCOPY:PRINTER:DLIST:INFORMATION?
-> :HCOPY:PRINTER:DLIST:
INFORMATION 1
:HCOPy:PRINter:DLISt:NORMal?
Function
Queries all settings related to the printing of the
numeric data list for power measurement.
Syntax
:HCOPy:PRINter:DLISt:NORMal?
Example
:HCOPY:PRINTER:DLIST:NORMAL? ->
:HCOPY:PRINTER:DLIST:NORMAL:
ELEMENT1 1;ELEMENT2 0;ELEMENT3 0;
ELEMENT4 0;SIGMA 0;SIGMB 0;SIGMC 0;
URMS 1;UMN 1;UDC 1;UAC 1;IRMS 1;
IMN 1;IDC 1;IAC 1;P 1;S 1;Q 1;
LAMBDA 1;PHI 1;FU 1;FI 1;UPPEAK 1;
UMPEAK 1;IPPEAK 1;IMPEAK 1;CFU 1;
CFI 1;FFU 1;FFI 1;Z 1;RS 1;XS 1;
RP 1;XP 1;PC 1;TIME 0;WH 0;WHP 0;
WHM 0;AH 0;AHP 0;AHM 0;ETA 0;
SETA 0;F1 0;F2 0;F3 0;F4 0;DURMS 0;
DUMN 0;DUDC 0;DUAC 0;DIRMS 0;
DIMN 0;DIDC 0;DIAC 0
5.6 HCOPy Group
5
5-35
Advertisement
Table of Contents
