YOKOGAWA WT1600FC User Manual page 40

5.1 Command List
Command
:HCOPy:PRINter:DLISt:NORMal?
:HCOPy:PRINter:DLISt:NORMal:ALL
:HCOPy:PRINter:DLISt:NORMal:{ELEMent<x>|SIGMA|SIGMB|SIGMC}
:HCOPy:PRINter:DLISt:NORMal:PRESet<x>
:HCOPy:PRINter:DLISt:NORMal:<power measurement function>
:HCOPy:PRINter:FEED
:HCOPy:SAVE?
:HCOPy:SAVE:ANAMing
:HCOPy:SAVE:COMMent
:HCOPy:SAVE:NAME
:HCOPy:TIFF?
:HCOPy:TIFF:COLor
HOLD Group
:HOLD
IMAGe Group
:IMAGe?
:IMAGe:COLor
:IMAGe:FORMat
:IMAGe:SEND?
IMPedance Group
:IMPedance?
:IMPedance:CURRent:MRANge?
:IMPedance:DCControl?
:IMPedance:DCControl:DETaile?
:IMPedance:DCControl:DETaile:HOLD
:IMPedance:DCControl:DETaile:LIMit
:IMPedance:DCControl:DETaile:RATio
:IMPedance:DCControl:OFFSet
:IMPedance:DCControl:OUTPut
:IMPedance:MEASure?
:IMPedance:MEASure:ANALysis?
:IMPedance:MEASure:ARRay?
:IMPedance:MEASure:TYPE
5-4
Function
Queries all settings related to the printing of the numeric data list for
power measurement.
Collectively turns ON/OFF the output of all elements and functions when
printing the numeric data list using the built-in printer during power measurement.
Turns ON/OFF the output of the {element|ΣA|ΣB|ΣC} when printing
the numeric data list on using the built-in printer during power measurement
or queries the current setting.
Presets the output ON/OFF pattern of the element and function when
printing the numeric data list using the built-in printer during power measurement.
Turns ON/OFF the output of the function when printing the numeric data list
using the built-in printer during power measurement or queries the current setting.
Executes paper feeding of the built-in printer.
Queries all settings related to saving the file.
Sets whether to automatically name the files to be saved or queries the
current setting.
Sets the comment to be added to the file to be saved or queries the
current setting.
Sets the name of the file to be saved or queries the current setting.
Queries all settings related to the TIFF format.
Sets the color tone for the TIFF format or queries the current setting.
Sets the output data (display, communications, etc.) hold or queries
the current setting.
Queries all settings related to the output of screen image data.
Sets the color tone of the screen image data to be output or queries the
current setting.
Sets the output format of the screen image data or queries the current setting.
Queries the screen image data.
Queries all settings related to impedance measurements.
Queries the present current range.
Queries all settings related to the DC load current.
Queries all settings related to the detailed settings of the DC load current.
Sets the action taken by the WT1600FC (handling of the control signal to the
DC electronic load device) when hold is activated or queries the current setting.
Sets the range of the DC load current or queries the current setting.
Sets the current value per volt of the control signal to the DC electronic load
device or queries the current setting.
Sets the current value of the DC load current or queries the current setting.
Turns ON/OFF the DC load current or queries the current setting.
Queries all settings related to impedance measurements.
Sets the type of impedance measurement mode or queries the current setting.
Queries the array information of the loaded pattern file.
Sets the FFT window width of impedance measurements or queries the
current setting.
Page
5-35
5-36
5-36
5-36
5-36
5-36
5-36
5-36
5-36
5-37
5-37
5-37
5-37
5-38
5-38
5-38
5-38
5-41
5-41
5-41
5-41
5-42
5-42
5-42
5-42
5-42
5-42
5-42
5-42
5-42
IM 760151-17E