Table of Contents
Advertisement
8.2 Supplier Third Party Certification
8.3 Manufacturer Test Certification
8.4 Declarations According to EU directives
Although they are primarily relevant for Europe, some countries outside Europe recognize and/or
require EU declarations. European directives are available on the official homepage: http://
eur-lex.europa.eu.
UR robots are certified according to the directives listed below.
2006/42/EC — Machinery Directive (MD)
According to the Machinery Directive 2006/42/EC, UR robots are partly completed machinery, as
such a CE mark is not affixed.
Note: If the UR robot is used in a pesticide application, you must note the presence of directive
2009/127/EC. The declaration of incorporation according to 2006/42/EC annex II 1.B. is shown in
appendix B.
2006/95/EC — Low Voltage Directive (LVD)
2004/108/EC — Electromagnetic Compatibility (EMC)
2011/65/EU — Restriction of the use of certain Hazardous Substances (RoHS)
2012/19/EU — Waste of Electrical and Electronic Equipment (WEEE)
In the Declaration of Incorporation in appendix B, declarations of conformity with the above
directives are listed.
A CE mark is affixed according to the CE marking directives above. Information on both electric
and electronic equipment waste is in chapter 7.
Information on standards applied during the development of the robot is in appendix C.
UR3/CB3
Environment
As provided by our suppliers, UR robots shipping
pallets comply with the ISMPM-15 Danish require-
ments for producing wood packaging material and
are marked in accordance with this scheme.
UR
UR robots undergo continuous internal testing and
end of line test procedures. UR testing processes
undergo continuous review and improvement.
8.4 Declarations According to EU directives
I-54
Version 3.10
Advertisement
Table of Contents
