Supplier Third Party Certification; Manufacturer Test Certification; Declarations According To Eu Directives - Universal Robots e Series User Manual

8.2 Supplier Third Party Certification
8.3 Manufacturer Test Certification

8.4 Declarations According to EU directives

Although they are primarily relevant for Europe, some countries outside Europe recognize and/or re-
quire EU declarations. European directives are available on the official homepage: http://eur-lex.
europa.eu.
UR robots are certified according to the directives listed below.
2006/42/EC — Machinery Directive (MD)
According to the Machinery Directive 2006/42/EC, Universal Robots e-Series robots are partly com-
pleted machinery, as such a CE mark is not affixed.
If the UR robot is used in a pesticide application, you must note the presence of directive 2009/127/EC.
The declaration of incorporation according to 2006/42/EC annex II 1.B. is shown in appendix B.
2006/95/EC — Low Voltage Directive (LVD)
2004/108/EC — Electromagnetic Compatibility (EMC)
2011/65/EU — Restriction of the use of certain Hazardous Substances (RoHS)
2012/19/EU — Waste of Electrical and Electronic Equipment (WEEE)
In the Declaration of Incorporation in appendix B, declarations of conformity with the above direc-
tives are listed.
A CE mark is affixed according to the CE marking directives above. Information on both electric and
electronic equipment waste is in chapter 7.
Information on standards applied during the development of the robot is in appendix C.
UR5e/e-Series
Environment As provided by our suppliers, Universal Robots
e-Series robots shipping pallets comply with the
ISMPM-15 Danish requirements for producing wood
packaging material and are marked in accordance
with this scheme.
UR Universal Robots e-Series robots undergo continu-
ous internal testing and end of line test procedures.
UR testing processes undergo continuous review
and improvement.
8.4 Declarations According to EU directives
I-54 Version 5.4