Table of Contents
Advertisement
18.3.6 Core Pullers In
Enables the movement of the core pullers to position 1. Which core pullers are used is selected from
the drop down menu. Use the checkboxes to enable/disable individual steps.
18.3.7 Core Pullers Out
Enables the movement of the core pullers to position 2. Which core pullers are used is selected from
the drop down menu. Use the checkboxes to enable/disable individual steps.
CB3
18.3 Program structure functionality
III-20
Version 3.10
Advertisement
Table of Contents
Need help?
Do you have a question about the UR3/CB3 and is the answer not in the manual?
Questions and answers