Table of Contents
Advertisement
This chapter presents a range of different certifications and declarations that have been
prepared for the product.
8.1 Third Party Certifications
Third party certifications are voluntary. However, to provide the best service to robot
integrators, UR has chosen to certify their robots at the following recognized test insti-
tutes:
8.2 Declarations According to EU directives
EU declarations are primarily relevant for European countries. However, some coun-
tries outside Europe recognize or even require them, too. European directives are
available from the official homepage: http://eur-lex.europa.eu.
UR robots are certified according to the directives listed below.
2006/42/EC — Machinery Directive (MD)
UR Robots are partly completed machinery according to the Machinery Directive 2006/42/EC.
Note that a CE mark is not affixed according to this directive for partly completed ma-
chinery. If the UR robot is used in a pesticide application, then note the presence of
directive 2009/127/EC. The declaration of incorporation according to 2006/42/EC an-
nex II 1.B. is shown in appendix B.
Version 3.1
(rev. 17782)
8 Certifications
T ¨ UV NORD
UR robots are safety approved by T ¨ UV NORD,
a notified body under the machinery directive
2006/42/EC in EU. A copy of the T ¨ UV NORD
safety approval certificate can be found in ap-
pendix B.
DELTA
UR robots are safety and performance tested by
DELTA. An electromagnetic compatibility (EMC)
certificate can be found in appendix B. An environ-
mental test certificate can be found in appendix B.
I-49
UR5/CB3
Advertisement
Table of Contents
