Safety Notes - Ametek 5000 Instrument Manual

Safety Notes

Warnings, cautions, and notes within the text of this manual emphasize important and critical
instructions as follows:
An operating procedure or practice which, if not strictly observed, could result in personal
!
injury, affect the operator's health, or contaminate the environment.
WARNING
An operating procedure or practice which, if not strictly observed, could result in damage to
!
equipment.
CAUTION

Not considered a hazard but requires attention.
NOTE
Read the entire Specification and Installation Sections of this manual before beginning the
!
installation and operation of the 5000 Analyzer System. Failure to do so, and/or use of this
equipment in a manner not specified in this manual or accompanying documents, may impair
WARNING
the protection against fire, electrical shock and injury originally provided by this equipment.
In addition, failure to follow the installation and start-up instructions may void the instru-
ments warranty.
Electrical Safety Warnings
Up to 240 Vac may be present in the analyzer and controller. Always shut down power sources
before performing any maintenance. Only a qualified electrician should make electrical connec-
tions and ground checks.
Any troubleshooting or maintenance to this Analyzer that requires access to the interior of the
!
various components must be performed by qualified service personnel only. There are no opera-
WARNING
tor level serviceable parts, expendables, or maintenance needs inside this equipment.
Instrument grounding is mandatory. Performance specifications and safety features are void if
the system is operated from an improperly grounded source. Check ground integrity to all por-
tions of the analyzer before power up. See Fig. 5e for proper internal grounding instructions.
vi 5000 Multi Point Moisture Analyzer