Ametek 5000 Instrument Manual page 7

Sample Gas
Potential hazards of the sample gas should be taken into consideration before connecting sample
to the analyzer. Personal protective equipment and proper ventilation must be used if sample
is toxic or corrosive. Eliminate all fire hazards if sample is flammable. Do not trap explosive gas
inside enclosure when installing the lid.
WARNINGS
The field unit may contain flammable or toxic process gas. Remove the field unit dome
lid in a well-ventilated area only after electrical power is shut off and the surrounding
area is known to be nonhazardous.
!
Check sample system for leaks before connecting to analyzer.
WARNING
!
The lid weighs 8.2 kg (18 lb). Use proper lifting methods and wear protective footwear when
removing.
WARNING

All operating, calibration, and maintenance procedures contained in this manual must be
strictly adhered to. If output is questionable, the system should be checked immediately for
NOTE
proper function and calibration.
vii