Avaya XT Series Deployment Manual page 88

Automatically provisioning the XT Series
Table 11: Basic Settings Fields
Field Name
Name
Username (H.323 ID)
Phone number (E.164):
Location
Registered To
Auto-answer
Automatic IP Address
IP Address
Subnet Mask
Default Gateway
DNS Server
August 2020
Description
The name of the endpoint
The H.323 username of the endpoint (displayed in H.323 calls)
The phone number of the endpoint
The location of the endpoint
The gatekeeper to which the endpoint is registered or the first
SIP server
The frequency policy by which the endpoint answers incoming
calls. Select from the following:
• Yes, always
• Never
• Yes, if not in a call
• Yes, trusted always
• Yes, trusted if not in a call
Note:
When selecting either of the last two options, only contacts
configured as trusted are accepted when the specified
condition is met. For details on configuring trusted
contacts, see Blocking All Calls Except From Trusted
Contacts in the Avaya Meetings Server XT Series User
Guide.
Indicates whether the IP address is to be obtained automatically
by the system.
The IP address of the endpoint; enabled only when the
Automatic IP Address field value is No.
The subnet mask of an endpoint's IP network; enabled only
when the Automatic IP Address field value is No.
The default gateway server to which the H.323 endpoint is
connected; enabled only when the Automatic IP Address field
value is No.
The server used to resolve the domain name of the endpoint;
enabled only when the Automatic IP Address field value is
No.
Ensure that a valid DNS is assigned. It can be manually
configured or automatically filled by the DHCP server. If the
DNS resolution of the cloud service address does not work, the
provisioning is not applied and the XT Series cannot be
managed in cloud mode.
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Table continues...
88