Upgrading The Software Using A Pc - Avaya XT Series Deployment Manual

Advanced Configuration of the XT Series
4. To upgrade the XT Series, see
Upgrading the software using a USB drive
Web Browser
Management
Method on page 207.

Upgrading the software using a PC

About this task
This section describes how to upgrade the software running on the Avaya Room System XT
Series by downloading the upgrade package to a computer on the network.
Before you begin
• If you upgrade to a major version, ensure you have a new license key (for details, see
Activating the XT Series and its Optional Features
• Verify that this PC is allowed to remotely manage this XT Series (enabled by default. See
Securing Web Access to the XT Series
• Enable remote upgrades and PCs allowed remote access as described in
Securing Upgrades
remote access to specific PCs.
• Download the update, or contact your local customer service representative.
Procedure
1. Verify the XT Series is connected to the network on the GLAN1
Verify the computer can reach the XT Series, and that a firewall does not block the
following port:
• 55099: If you have not enabled secure upgrades.
• 55090: If you have enabled secure upgrades, as described in
Upgrades
2. Verify that your computer is connected to the network using a cable.
The upgrade could take too much time through a wifi network.
August 2020
Upgrading the software using a PC
on page 206, Upgrading the Software Using Avaya Meetings
on page 207 or Upgrading the Software Using the Over The Air (OTA)
on page 202. Be sure to use an allowed computer if you restricted
on page 202.
Figure 99: GLAN1 port
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
on page 205, Upgrading the Software Using a
on page 105).
on page 232).
on page 204,
Enabling and
port.
Enabling and Securing
204