Defining The Rules For Accessing Xt Web Video - Avaya XT Series Deployment Manual

Advanced Configuration of the XT Series

Defining the Rules for Accessing XT Web Video

You can monitor local and remote video from the Avaya Room System XT Series Web interface by
selecting More Actions > Web Video. This feature enables you to define the video refresh rate
and zoom. This feature also enables you to take video snapshots and save them to your
computer. When you are using Web Video, an eye icon is displayed in the system's title bar,
beside the time stamp.
The Web Video feature is disabled by default for the XTE240.
About this task
This procedure enables you to define the rules for accessing the XT Series web video.
Procedure
1. From the endpoint's main menu, select Configure > Advanced > Utilities > Remote
Access > Web Video.
2. Set the fields as required.
Table 50: Configuring Rules for Accessing XT Web Video
Field Name
Web Video Management
Enable all addresses
August 2020
Figure 95: Web Video Settings
Description
Select No to disable the feature.
Select No to restrict web video remote access via TCP to specific
devices with an IP address in the range of the Address and
Subnet Mask fields below.
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Table continues...
196