Avaya XT Series Deployment Manual page 195

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the customization settings. From the XT Series web interface, select
Administrator Settings > System > Customization > General. From the endpoint's main
menu, select Configure > Advanced > System > Customization.
2. From the Remember Favorite Layout menu, choose from the following options:
• Select Never to always revert to the default layout. It is enabled by default.
• Select In a call to ensure that the codec unit uses the last layout used in the same call
for that combination of video flows. This means that the next time you receive a
presentation in the same call, you automatically see the last layout you chose (your
favorite one).
• Select Always to ensure that the codec unit uses the last layout used for that
combination of video flows. This means that the next time you receive a presentation in
the same call or a different call, you automatically see the last layout you chose (your
favorite one). Do not use this option for room systems shared by multiple users, as they
could expect the default layouts.
3. From the web interface only, select Save.
August 2020
on page 151.
Figure 94: Customization — General
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Configuring Remember Favorite Layouts
195