Avaya XT Series Deployment Manual page 69

Note that this is an example diagram. The back panel for Deluxe and Flex cameras is
different from this one.
4. Attach the two connectors on the other end of the camera cable as shown in
Connecting cables to the XT5000
Avaya XT7000 Series
a. For the XT5000: The HDMI connector to the HDMI socket labeled 1 on the Avaya XT
Series Camera Switch.
b. For the XT7000: The HDMI connector to the HDMI socket labeled 1 on the XT7000.
c. The connector for power and serial control must be connected to the
socket on the XT Codec Unit.
August 2020
Figure 33: Connecting cables to the back of the camera
on page 70 and
on page 70:
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Connecting Cameras or DVD players
Figure 35: Connecting cables to the
Figure 34:
horizontal
69