Avaya XT Series Deployment Manual page 200

Advanced Configuration of the XT Series
2. Set the fields as required.
Table 52: Configuring SNMP settings
Field Name
SNMP management
Administrator name
Location
Community
Enable all addresses
Address
Subnet mask
August 2020
Figure 97: SNMP Settings
Description
Select Yes to enable an SNMP server.
(Optional) Enter a contact name to enable SNMP management for this
device which would appear in an SNMP browser.
(Optional) Enter the location of the device, which would appear in an
SNMP browser.
Enter the name of the SNMP community that supports the read
operations of SNMP management. Avaya Meetings Management
requires the name to communicate with the gateway in the SNMP
Get/Set Community fields.
The community values are case-sensitive. Typically there is a separate
community for read (GET) called public and a community for write (SET)
called private.
Select No to restrict SNMP remote access for read operations to specific
computers in the range of the Address and Subnet Mask fields below.
Enter the IP address of computers allowed to remotely access SNMP for
read operations.
Enter the Subnet mask to modify the Address field into a range of
addresses allowed to remotely access SNMP for read operations.
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
200