Avaya XT Series Deployment Manual page 176

Advanced Configuration of the XT Series
Field
commOwner
h323IdentityEndpointType
h323IdentitytransportID
h323IdentitytransportDigits
h323IdentitytransportNumber
h323Identityh323-ID
SIPIdentitySIPURI
- Each user (inetOrgPerson entity) must have its commURI field pointing to the user's
endpoint (commObject ID). For example:
ldap://123.456.789.012/ou=h323identity,dc=company,dc=com??sub?(commUniqueId=6)
Avaya XT5000
Series
where commUniqueId refers to the commObject ID.
A centralized solution like Avaya Meetings Management enables synchronizing the same list of
contacts across all the endpoints in your organization, and has other benefits like remote
centralized upgrading and backing up of all endpoints in your video network. You can configure
the XT Series to use Avaya Meetings Management as the LDAP directory also from the Avaya
Meetings Management administrator portal (for details, see the Administrator Guide for Avaya
Meetings Management).
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
If you are using Avaya Meetings Management as the LDAP directory, you must associate LDAP
contacts to video endpoints; otherwise these contacts are not displayed on the XT Series. You
must also ensure that LDAP Contacts are enabled on your Avaya Meetings Management. Each
LDAP contact on the XT Series can only be mapped to a maximum of ten video endpoints.
Procedure
1. Access the LDAP settings. From the XT Series web interface, select Administrator
Settings > System > LDAP. From the endpoint's main menu, select Configure >
Advanced > System > LDAP.
2. Select Add or Add Server.
August 2020
Value
uid=<x>,ou=people,dc=company,
dc=com
Terminal
<ip address>
<E.164 dial number>
<H.323 alias>
<H.323 alias>
<URI address of SIP endpoint>
on page 151.
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
Comments
The user ID associated with
this endpoint
Use this exact value for
H.323 endpoints only
One of these fields must be
defined for an H.323
endpoint.
SIP endpoints only.
176