Restore Configuration; Reset To Factory Defaults - ZyXEL Communications SBG5500-A User Manual

Restore Configuration

Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your SBG.
Table 117 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Choose File to find it.
Browse Click this to find the file you want to upload. Remember that you must decompress compressed
(.ZIP) files before you can upload them.
Upload Click this to begin the upload process.
Do not turn off the SBG while configuration file upload is in progress.
After the SBG configuration has been restored successfully, the login screen appears. Login again to
restart the SBG.
The SBG automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 180 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your computer
to be in the same subnet as that of the default device IP address (192.168.1.1).
If the upload was not successful, the following screen will appear. Click OK to go back to the Backup /
Restore screen.
Figure 181 Configuration Upload Error

Reset to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the SBG to its
factory defaults. The following warning screen appears.
Chapter 22 Backup / Restore
SBG5500 Series User's Guide
251