21.5.2 Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your computer
to your ZyWALL.
LABEL
File Path
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click Browse... to find the file you want to upload. Remember that you must decompress
Browse...
compressed (.ZIP) files before you can upload them.
Upload
Click Upload to begin the upload process.
Do not turn off the device while configuration file upload is in progress.
After you see a "configuration upload successful" screen, you must then wait one minute before logging into
the device again.
The device automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Maintenance
Table 21-4 Restore Configuration
Figure 21-10 Configuration Upload Successful
Figure 21-11 Network Temporarily Disconnected
ZyWALL Series Internet Security Gateway
DESCRIPTION
21-9