Table of Contents
Advertisement
Figure 109 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 77 Maintenance > Firmware Upgrade
LABEL
Firmware Upgrade
File Path
Choose File
Upload
Do not turn off the EMG3425-Q10A while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the
EMG3425-Q10A again.
The EMG3425-Q10A automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 110 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears.
25.7 Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the EMG3425-Q10A's current configuration to a
file on your computer. Once your EMG3425-Q10A is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your EMG3425-Q10A.
Chapter 25 Maintenance
DESCRIPTION
Type in the location of the file you want to upload in this field or click Choose File to find it.
Click Choose File to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
EMG3425-Q10A User's Guide
181
Advertisement
Table of Contents
