Installing The Table Reinforcement Plates (Embedded Installation Only); Installing The Machine Head; When Setting Up On Top Of The Table - Brother RH-9820 Instruction Manual

3-3. Installing the table reinforcement plates (embedded installation only)

3-4. Installing the machine head

3-4-1. When setting up on top of the table

Table
0343B
0342B
<Only when using the treadle>
Before installing the machine head, install the three treadle
mounting bolts (A) to the table.
* Insert the bolts (A) securely so that their heads do not
protrude out from the top of the table.
(Refer to "3-12. Installing the treadle unit (when using the
treadle)".)
RH-9820
3. INSTALLATION
(1) L-shaped reinforcement plates
[2 pcs.]
(2) Bolts [10 pcs.]
(3) Plain washers [10 pcs.]
(4) Spring washers [10 pcs.]
(5) Nuts [10 pcs.]
(Continued on next page)
8