Installing The Included Table - Brother Entrepreneur Pro PR1000e Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Installing the Included Table

When using the optional border, quilt, flat or jumbo frame, it is recommended that the table be used for
additional support.
CAUTION
●
Be sure to install the table when using the optional jumbo frame, border frame, quilt frame
or flat frame. If these frames are used without the table installed, the weight of the frame
and fabric may cause the frame to slant and result in poor embroidering quality.
● When carrying the table, be sure to hold it
with both hands.
● Attach the table to the machine before
installing the embroidery frame.
● Do not place heavy objects on top of the
installed table or press down on it.
● Remove the table from the machine while
using embroidery frame that do no need to
be used with the table or while
embroidering tubular items, bags or caps.
The embroidery frames for these types of
objects cannot be installed while the table
is attached to the machine.
1 Loosen the two thumb screws 5 to 6 turns.
Note
2 Position the table so that the notch at the
center aligns with the machine bed, and then
place the table flat on the guide plates.
1 Machine bed
2 Guide plate
3 Notch in table
Installing the Included Table 251
7