Table of Contents
Advertisement
page 56
8.4
Measuring interfacial tension by the ring method
The two following subsections describe the course of the measurement for the
measuring methods
Chapter 8.1.1 describes which method applies to which liquid system.
8.4.1
Interfacial tension pull
Check whether all the requirements contained in the check list (
been met.
Select the measuring mode
The following table shows the course of the measurement:
Display
Sample:
enter a name for the
liquid system
Only if defined in
Setup:
In succession
1
Field 2
,
User:
please enter a
name
IFT pull
and
IFT-pull
Ring method: Interfacial tension pull
Insert the sample
and use the keypad
to enter a system
name.
Enter the required
contents in the text
fields
Field
Field 3
,
Use the keypad to
enter an operator
name.
IFT push
.
. Start the measurement with ENT key.
Action
Maximum 22 characters
The text fields, whose number is
defined in Setup, are called up in
succession (max. 3) and are used
to describe the measurement. The
text fields can be named in
LabDesk and these fields assigned
to the corresponding data of the
current measurement.
Maximum 22 characters
Ring method measurements
ch. 6.5) have
Explanation
Advertisement
Table of Contents
