Table of Contents
Advertisement
page 24
4.5.2
Moving the sample platform using the rotary knob
To raise the sample stage: Turn the rotary knob clockwise (in the
To lower the sample stage: Turn the rotary knob anticlockwise (in the
direction).
The amount of deflection determines the speed of movement.
4.5.3
Saving and activating standard sample platform positions
Saving
1. Move to the required upper position of the sample platform using the rotary knob.
2. Press the
3. Move to the required lower position of the sample platform using the rotary knob.
4. Press the
The arrows do not indicate the direction of movement. For example, when the
sample table is below the lower standard position, pressing the
upward movement.
Activating
To move the sample platform to the upper standard position:
Press the
To move the sample platform to the upper standard position:
Press the
key for about 2 seconds.
key for about 2 seconds.
briefly
key
.
briefly
key
.
Operating the instrument
Up
direction).
Down
key initiates an
Advertisement
Table of Contents
