Interfacial Tension Push - kruss K11 MK3 User Manual

Ring method measurements
8.4.2

Interfacial tension push

Check whether all the requirements contained in the check list (
been met.
Select the measuring mode
The following table shows the course of the measurement:
Display
Sample:
enter a name for
the liquid system
Only if defined in
Setup:
In succession
Field 1 Field 2
,
Field 3
User:
please enter a
name
IFT-push
Ring method: Interfacial tension push
Action
Insert the sample and
use the keypad to
enter a sample
name.
Enter the required
contents in the text
fields
,
Use the keypad to
enter an operator
name.
. Start the measurement with ENT key.
Explanation
Maximum 22 characters
The text fields, whose number is
defined in Setup, are called up in
succession (max. 3) and are used
to describe the measurement. The
text fields can be named in
LabDesk and these fields
assigned to the corresponding
data of the current measurement.
Maximum 22 characters
page 59
ch. 6.5) have