Table of Contents
Advertisement
Measurements with the plate or rod method
Display
Only if defined in
Setup:
In succession
1
Field 2
,
,
User:
please enter a
name
Insert the light
phase and
immerse the
probe completely
Taring
Remove the light
phase, clean the
probe, insert the
heavy phase and
position the probe
above the surface
Action
Enter the required
contents in the text
fields
Field
Field 3
Use the keypad to
enter an operator
name.
Insert the sample
vessel containing
the light phase and
move the sample
upwards until the
edge of the plate is
just covered.
automatic
Carry out activities
according to
display.
At the end move the
surface up until it is
just below the
probe.
Explanation
The text fields, whose number is
defined in Setup, are called up in
succession (max. 3) and are used
to describe the measurement. The
text fields can be named in
LabDesk and these fields assigned
to the corresponding data of the
current measurement.
Maximum 22 characters
Taring the probe in the liquid
page 45
Advertisement
Table of Contents
