Table of Contents
Advertisement
Density measurement
Display
Remove the stick
from the hook,
insert the liquid
and position the
hook above the
surface
Searching
Immersing
Measuring
Put the stick onto
the hook
Action
proceed according
to the instructions
on the display
automatic
automatic
automatic
Place the probe on
the holding device
using forceps.
Explanation
The sample vessel is moved
upwards at the entered search
speed until the contact between
the holding device and the liquid
surface is registered.
The sample vessel is moved
further upwards at the entered
search speed until the holding
device is completely immersed.
The entered immersion depth is
irrelevant here.
The weight of the holding device in
the liquid is measured; this
determines the buoyancy of the
holding device which is then taken
into account. The sample vessel
then moves back downwards.
page 65
Advertisement
Table of Contents
