Headliner Retaining Strip On Bracket - Audi TT 207 Repair Manual

Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1 - Retaining strip
❑ Retaining strip with ten‐
sioning strap removed.
❑ No replacement part,
part of the convertible
top headliner delivery
package.
2 - Rear convertible top head‐
liner
❑ The convertible top
headliner is secured all
around to the rear win‐
dow with Velcro strip.
❑ To remove, pull from the
rear window.
3 - Bracket
4 - Bolt
❑ 2.5 Nm
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.1.21

Headliner Retaining Strip on Bracket

Installing
Caution
♦ The bracket has two grooves.
♦ The heating element cable for the rear window heater
must be routed in the upper groove.
♦ The screws for securing the retaining strip must be
screwed into the lower groove.
– Rear window heater cable -4- must be routed in the upper
groove -arrow- on bracket -5- as shown.
– Secure retaining strip -2- for convertible top headliner -3- with
screws -1- in the lower groove.
138
Rep. Gr.61 - Convertible Top