Lettering; Specifications - Audi TT 207 Repair Manual

2

Specifications

⇒ "2.1 Lettering", page 221
⇒ "2.2 Spoiler - TT", page 223
⇒ "2.3 Spoiler - TT RS", page 224
2.1

Lettering

Caution
♦ The adhesive surfaces on the body must be free of dirt
and grease.
♦ Clean the adhesive surfaces using cleaning solution -D
009 401 04- .
♦ Warm the adhesive surfaces and lettering to approximate‐
ly 104°F (40°C) using a hot air blower.
♦ After assembly, press the lettering with the -T10314- .
Special tools and workshop equipment required
♦ Roller -T10314-
♦ Hot air gun -V.A.G 1416-
Rear Lid Dimensions
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Specifications
221