Audi TT 207 Repair Manual page 81

1 - Rear backing
❑ Clip into door panel.
2 - Door handle
– Before installing, back‐
ing plates -2- and -5-
must be installed.
– Slide door handle into
front door opening until
it engages in brace on
mounting bracket
-arrow-.
– Press door handle on
rear lock cylinder into
mounting bracket.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Insert lock cylinder with
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
cover cap.
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Completely install bolt to
secure lock cylinder
⇒ page 97 .
3 - Bracket
4 - Front backing
❑ Slide onto door handle.
5 - Door
– When installing door handle -1-, rear end must slide into
mounting bracket in -direction of arrow- as shown.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation
77