Table of Contents
Advertisement
4 - Plenum chamber cover molding
❑ No replacement part
❑ With a new window, protective piping must first be removed before installing plenum chamber cover.
5 - Plenum chamber cover
❑ Press into retaining strip only after window adhesive curing time is complete (3 hours).
Removing Protective Tubing
– With a new windshield -1-, protective tubing -2- must be re‐
moved from molding -3- before installing plenum chamber
cover -4-.
1.1.2
Windshield Assembly Overview - Roadster
1 - Windshield
❑ Distance to roof dimen‐
sion -a- = 2 mm.
❑ Even out side distance
dimension -c- = 3 mm.
2 - Adhesive sealing material
3 - Spacer
❑ Bond the same number
in the same positions as
on the removed window.
4 - Plenum chamber cover
molding
❑ No replacement part
❑ With a new window, pro‐
tective piping must first
be removed before in‐
stalling plenum cham‐
ber cover.
5 - Plenum chamber cover
❑ Press into retaining strip
only after window adhe‐
sive curing time is com‐
plete (3 hours).
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1. Description and Operation
191
Advertisement
Table of Contents
