Table of Contents
Advertisement
– Slide securing spring -1- sideways under connecting piece
-3- out of cylinder using a screwdriver.
– Remove connecting piece -1- from cylinder using sealing ring
-2-.
– Carefully remove sealing ring -1- using a small hook -2- if nec‐
essary without damaging -3- cylinder.
– Slide new sealing ring -2- onto connecting piece -1-.
– Insert connecting piece -3- vertically in cylinder, no resistance
must be felt.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
149
Advertisement
Table of Contents
