Rear Window, Installing - Audi TT 207 Repair Manual

Audi TT 2007 ➤
Body Exterior - Edition 11.2010
With New Window:
– Clean window in adhesive area between inner -1- and outer
adhesive stopper profiles -2- using Cleaning Solution -D 009
401 04- .
– Apply Glass and Paint Primer -D 009 200 02- as described
below.
Note
Ceramic application on window is not primer! It must be primed
before the application of adhesive sealing material!
Applying Primer:
Caution
Primer conducts electricity and must not touch rear window
defroster distributing wire.
– Apply primer -3- with applicator -2- evenly in one stroke be‐
tween adhesive stopper profiles on window -4-.
– Beginning applying with saturated felt.
• Apply primer over entire width between stopper profiles.
• Drying time 10 minutes
Note
If the paint on the window flange is damaged when the rear win‐
dow is removed, repair it according to the Audi paint handbook.
– First clean corrected area with Cleaning Solution -D 009 401
04- and then apply Glass and Paint Primer -D 009 200 02- .

Rear Window, Installing

210
Rep. Gr.64 - Glass, Window Regulators
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.