Table of Contents
Advertisement
1 - Inside door release mecha‐
nism cable
2 - Grommet
❑ Must be pressed into
cover -4- completely.
3 - Door inner panel
4 - Cover
❑ To removal, release
cover retaining tabs in
stages using a thin ob‐
ject.
❑ Retaining tab location
5 -
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Cover retainers
– Release retainers -arrows- on cover -1- from inner door panel
-2- in stages using a thin object.
– Replace seal -3- if necessary
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
91
Advertisement
Table of Contents
