Table of Contents
Advertisement
11 - Bolt
❑ 2.5 Nm.
Anti-theft cover, removing
– The anti-theft cover -1- is slid between the door lock -2- and
mounting bracket -3- onto the door panel -4- as shown.
Lock cylinder, removing and installing
– Pry off cover -1-.
– Pull door handle and hold firmly.
– Remove bolt -2- as far as stop using socket wrench (AF T20).
– The lock cylinder housing is only completely released with light
pressure on the socket wrench or bolt.
– Remove lock cylinder housing -2- sideways from door or
mounting bracket.
Installation
Reverse order of removal.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
97
Advertisement
Table of Contents
