Table of Contents
Advertisement
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
1 - Hood
2 - Gas strut
❑ Note the installation lo‐
cation and attach the
gas-filled strut tube on
the body side.
❑ Note different versions.
3 - Ball stud
❑ 21 Nm
4 - Retaining clip
❑ To release, raise slightly
with a small screwdriv‐
er.
❑ Note different versions.
Note
Different gas-filled struts are installed and their removal varies.
Removing the gas-filled strut with the steel spring
– Detach the gas-filled strut for the rear lid by lifting retaining
spring -2- using a small screwdriver -1- -arrow-. Now remove
gas-filled strut -3- from the ball stud.
54
Rep. Gr.55 - Hood, Lids
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Advertisement
Table of Contents
